Laparoscopic Needle Holder

Name: China Cheap Laparoscopic Needle Holder Suppliers & Manufacturers - Factory Direct Wholesale - Kanger Medical
Brand: Kanger
SKU: 78626677

Code:101.023F
Size:5*330mm
Five styles for your choose.

Send Inquiry

Chat Now

Product Introduction

Laparoscopic Needle Holder

1.Intended Use

Needle holders are used to place sutures in endoscopic surgery using suture material suitable for the size of the needle holder.

Five styles of reusable Needle Holderfor your choose as below:

V-shaped needle holder

Ethecon V Shape Needle Holder

A-shaped needle holder

101.023ABCD

B-shaped needle holder

101.023JLKMN

Gun-shaped needle holder

101.026ABCDE

O-shaped needle holder

101.025ABCD

2.Contraindications

No contraindications relating directly to the product are currently known. Use of needle holders is contraindicated if, in the opinion of the responsible physician, the use of such an application would endanger the patient, e.g. due to the patient’s general condition, or if the endoscopic method as such is contraindicated.

Unauthorized conversions or modifications to the instrument are prohibited for safety-related reasons.

3.Instructions for Function

Function	V-shaped needle holder/ Gun-shaped needle holder	O-shaped needle holder
Locking the ratchet	You can lock the ratchet by closing the needle holder until the ratchet clicks audibly into place and the requaired needle clamping force is attained.
Releasing the ratchet	You can release the ratchet by closing the needle hoder slightly and pressing the locking button 5 at the same time,and then releasing the pressure on the handle.	You can release the ratchet by closing the needle holder slightly and pressing the handle laterally toward each other,and then releasing the pressure on the handle.
Deactivating the ratchet	You can deactivate the ratchet by folding down the lever.	Not present

Choose the right type instrument and make sure the device has been sterilized before the operation.

Close the jaws before entering through the trocar.

After entering through the trocar, press the locking button to open the jaws.

Use the jaws to grip the needle, and adjust tightness of the handle.

When suturing the wound, the jaws should be vertical to the needle, and the needle should be vertical to the tissue.

Sterilization Method	Product Category	Temperature	The Minimum Time	Pressure
Moist heat---Gravity Displacement Autoclave	Appliance	121°C	30 Min	102.9 Kpa
Moist heat---Pre Vacuum Process	Appliance	132-134°C	4 Min	205.8 Kpa